ITS 967X7179M372 | Flame Scanner for Gas Turbines

Reliable and successful for many years now

This Flame Scanner (replacement for Honeywell LG1093AA24, GE Part Number 261A1812P012 etc.) is designed to detect the ultraviolet radiation emitted by a hydrocarbon flame and produce a number of pulse outputs which corresponds to the intensity of the ultraviolet radiation. The control system will determine whether there is flame or no flame, based on a programmable threshold setting.

Principle of Operation

The detector utilizes an ultraviolet sensitive cold cathode tube which operates on the Geiger-Mueller Principle. The detection tube is gas filled and contains an anode and a cathode to which voltage is applied. Normally the gas insulates and no current is drawn. When ultraviolet rays in a wavelength of 1850 to 2600 Angstroms reach the tube they force the gas to emit electrons, creating ionized particles within the tube.

As the number of ionized particles begin to increase, an electrical current will flow between the electrodes. As long as ultraviolet rays continue to reach the detection tube, a pulsed electrical signal is generated.

This ITS Flame Scanner replaces the following OEM Parts in the full scope:

Flame Scanner ITS 967X7179M372 for Gas Turbines

Replaces
GE Part No.:

261A1812P010
261A1812P012

Replaces
Honeywell Part No.:

  LG1093AA01
  LG1093AA02
  LG1093AA03
  LG1093AA04
  LG1093AA24
  LG1093AA34
  LG1093AA44
  LG1093AA45

II 3G Ex d IIC T3

This Flame Scanner is supposed to be used in an atmosphere which may be sometimes hazardous. For a save operation special requirements for the electronic systems may be needed.

ITS ATEX Information and FAQs (2,5 MB) ⇨

Find more details on Wikipedia:

Documents for the Flame Scanner ITS 967X7179M372

ITS Flame Scanner Info Folder - High Resolution (8,9 MB)

ITS Flame Scanner Info Folder - Low Resolution (0,9 MB)

OEM Part Number Comparison Chart (0,1 MB)

Technical Specification Sheet Flame Scanner ITS 967X7179M372 (0,4 MB)

Technical Information Letter Flame Scanner ITS 967X7179M372 (0,7 MB)

Exceptionally Flexible Protection System for Flame Scanner Cables

The flame scanner cable is one of the most delicate attachment parts on a gas turbine. The cable protection system of the OEM manufacturer is very clunky and impractical to handle. The cable protection system from ITS is the most lightest, most flexible and easiest to handle system with maximum protection available on the market.

View details

Accessory Parts for the Flame Scanner ITS 967X7179M372

Comprehensive expansion of the operational spectrum - A wide range of accessories expands the possibilities to use this Flame Scanner. We have developed a Water Cooling System which can expand the operational temperature range of the Flame Scanner. It consists of a Water Cooling Coil, which prevents the electronics in the Flame Scanner to exceed its temperature limit.

For the Flame Scanner Cable, which is the linkage between the Flame Scanner and the Junction Box, is a Protection System available. It consists of a metal hose and a stainless steel connector.

View details

Pre Configured Sets for the Flame Scanner ITS 967X7179M372

Our coordinated sets contain everything you need for the improvement of your flame scanning device. We’ve pre-configured our Flame Scanner ITS 967X7179M-Series sets with our most popular accessories and add-ons to make your buying decision easy. Click the button to learn more!

View details

Purchase ITS flame scanner

If you would like to purchase ITS flame scanner, please do not hesitate to send a quote request.

Please give us the following information:

> Product ID & number of pieces

> Full business credentials

We are looking forward to sending you a suitable offer as soon as possible.

Send request now

Videos and Tutorials

Flame Scanner System Change UV to SiC on MarkV Turbine Control System

Cable Protection for Flame Scanner on Gas Turbines

ITS Flame Scanner Production - Promotion Video