Flame Scanner Accessory Parts - Sets for ITS 967X7179M-Series

Compiled for your needs

The advantages of buying these sets are that all included parts fit seamlessly together. All the parts have been tested for daily use in the turbine environment. They come fully prepared with all the parts you need. You would therefore not have to think about ensuring that you have all the correct parts as it is already prepared and checked for you.

Two different Packages are available:

Cable Protection Set  ITS 967X7179M20-Series  ⇨

Flame Scanner Set - Cable Protection  ITS 967X7179M30-Series  ⇨

Cable Protection Sets

The constant deterioration of the cable from the vibrations created from the operation of the gas turbine or careless maintenance personnel, can cause repeated damage to the cable between the Flame Scanner and the junction box. With this set, the cable is reliably protected and future damages can be avoided.

The stainless steel hose is particularly advantageous as it protects the cable from the junction box to the flame scanner. By default, 3 meters are supplied, but can be ordered according to your needs. If you add that together with the connector and the fitting sets, an efficient protection of the cable is ensured.

Depending on the manufacturer of the junction box, adapters converting 3/8" to 1/2 ", 3/4" or 1 " are included.

NOTE: Use attention to the applicable ATEX regulations!

This set includes:

1x Stainless Steel connector of your choice  ITS 967X7179M10-Series  ⇨

1x Spirally-wound metal protective conduit (3 Meter)  ITS 184X0251M461  ⇨

1x Fitting set (consisting of 2 parts)  ITS 184X0251M481  ⇨

1x Junction box fitting set  ITS 184X0251M482  ⇨

Flame Scanner Set - Cable Protection

In addition to our Cable Protection Set we offer the Premium Set supplemented by a Flame Scanner. The advantage of taking our all inclusive package lies in the fact that all of the pieces fit effortlessly together as they are literally manufactured from one another.

With this set you have done everything you possibly can to protect your Flame Scanning System.

Depending on the manufacturer of the junction box, adapters converting 3/8" to 1/2 ", 3/4" or 1 " are included.

NOTE: Use attention to the applicable ATEX regulations!

This set includes:

1x Flame Scanner ITS 967X7179M-Series  ITS 967X7179M372  ⇨

1x Stainless Steel connector of your choice  ITS 967X7179M10-Series  ⇨

1x Spirally-wound metal protective conduit (3 Meter)  ITS 184X0251M461  ⇨

1x Fitting set (consisting of 2 parts)  ITS 184X0251M481  ⇨

1x Junction box fitting set  ITS 184X0251M482  ⇨

Accessory Parts for the Flame Scanner ITS 967X7179M-Series    

Comprehensive expansion of the operational spectrum - A wide range of accessories expands the possibilities to use this Flame Scanner.

For the Flame Scanner Cable, which is the linkage between the Flame Scanner and the Junction Box, is a Protection System available. It consists of a metal hose and a stainless steel connector.

View details

Purchase ITS flame scanner sets

If you would like to purchase ITS flame scanner sets, please do not hesitate to send a quote request.

Please give us the following information:

> Product ID & number of pieces

> Full business credentials

We are looking forward to sending you a suitable offer as soon as possible.

Send request now